In Shop Chassis Setup
Bring your drag car to our shop & let us scale your car, plot your suspension and make recommendations and baseline chassis changes in our shop! You will need to contact us via our email at email@example.com to get this scheduled.
This is our most preferred method of tuning so we eliminate all guesswork and possible incorrect information being provided to us with our Remote Suspension Tuning Services. In the shop work includes complete drag car chassis setup, full 4 Link Plotting, 4 corner scaling, pinion angle, ARB setup, bar adjustments as needed, shock compression and rebound settings, coilovers, front end alignment, ride height adjustments and a full 1 on 1 consultation about your drag car with full recommendations on tuning your suspension at the track based on testing!
Documentation, email and pictures are included!
Watch this VIDEO to understand your double adjustable shocks!
Full Remote Chassis Setup
Remote suspension tuning and chassis setup services via email & 30 minute phone call. This is the most comprehensive remote service offered! Please use this PDF to assist in tuning: suspension_tuning_questionnaire
Even if you cannot complete the entire questionnaire, please try to capture the info listed, especially videos of your car at the track, to provide to me in an email. Pictures from underneath your car are also a tremendous help. The more accurate details you can give me, the more on point my recommendations are back to you. Garbage in, garbage out.
Check out this VIDEO on what goes into this type of work.
Email Only Help
Email response for suspension tuning help & general support of our YouTube Channel KevinWilsonSBC! Want to give more, then up the Quantity. For those who just want to have an email dialogue with me about setting up their drag cars chassis, this is for you.
This is not as involved as the Full Remote Suspension Tuning with phone call, but it really all depends on how much detail you provide on your suspension, along with pictures/videos, and the issue. This is more than just 1 email, as I will have questions for you, but generally after 24 hours, this email only support is finished. You can understand I hope that I cannot continue to provide email support for weeks on end.
These funds will help us continue to provide suspension tuning content & real world track testing of the Blown SBC 48 Ford Coupe & 53 Studebaker. Change quantity to give more.
Also, if you support us and email a pic of your car with some info about it, I will feature it on an upcoming video!
Chassis Building Design Help
This service is dedicated to helping you via email on setting up your chassis with bracket placement and ride height help, along with motor placement. If you do not have a welded chassis and you need my help with the chassis this is the service I will use to provide email help for up to 7 days. We can add a phone call for up to 30 minutes for an additional $75. Using the Full Remote service for building a chassis is not the correct service for this type of work.
Donation: 4" round vinyl sticker
This is the very first logo design I made for KevinWilsonSBC and these are 4" round. I have 3" round stickers being made now that will be much cheaper than this small batch first run of 4" vinyl stickers. I only have 20 of this first series available. For a $10 donation I will mail in the US a decal until the 20 are gone.