843-747-7880
Business Hours:
Sunday: Closed
Mon:  10:00 AM - 4:30 PM
Tue:   10:00 AM - 4:30 PM
Wed: 10:00 AM - 1:30 PM
Thu:  10:00 AM - 4:30 PM*
Fri:     10:00 AM - 1:30 PM*
Saturday are Appointments Only (so drive-up service may be difficult)

*Please note we stay very busy so it is always best to call the shop at 843-747-7880 to schedule an appointment.  Please leave a message if we have our hands full or test driving a car. We are located at 5015 Rivers Avenue, Unit 200, North Charleston, SC, 29406 which is directly before TSC Technology iPoint Security. 
Connect with us on Social Media

Altered is for sale!!

After so many years of fun with the Altered, it is time to let someone else have some fun as I focus on the 48 Ford Coupe with my dad. We will also include the trailer we built to haul the altered and protect it from the rain while being towed. Click on the video to the right to see all the info and hear it do a cold start up.

SamSon Performance - Not a camaro, not a mustang, it is a 48 Ford Coupe with a SBC 406! Blown SBC 406 in progress!

A little about ourselves

Sam's Frame & Alignment and SamSon Performance is focused on delivering real world results to the performance community and the daily drivers in the Low Country area.  Anything from 2 & 4 wheel alignments, race chassis setup/tuning, brakes, engine building, rear-ends, etc., Sam and Kevin can spend time with you up-front to best understand your need and then give you a real plan on how to best proceed.
How to adjust and better understand Double Adjustable Shocks - Spring Rates - Double Adjustable Coilovers - Drag Car Suspension Tuning
Check-out our YouTube channel to see many more videos like the one here on double adjustable shocks. We are vlogging the entire build for the Blown 48 Ford Coupe Drag car! Everything from filing piston rings, to selecting pistons for boost, setting up the suspension will be shared. No secrets withheld on the buildout. 

Recent News

We have decided to build a Blown SBC 406 with a 8-71 Roots Blower and dual Methanol carbs from Patrick at Pro Systems. The 8-71 will be from The Blower Shop and it will have the Helical 120 degree rotors and shooting for 22 lbs of boost. This will be accompanied by a FuelTech ECU, dual wideband O2 sensors and data logging. Sequential spark and going with fuel injection will be phase 2! Below is a video of our last build naturally aspirated. The Rods and Pistons video above is the first of many vlog videos detailing the blown SBC 406 build. Check our YouTube Channel: youtube.com/kevinwilsonsbc
Photo at top by Brett Jennings Photography